Blower Motor Resistor

BLOWER MOTOR RESISTOR

Removal and Installation

Vehicles equipped with 4.6L, 5.4L or 6.8L engine
1. Disconnect the battery.
2. Remove the battery.







3. Remove the battery tray.
1 Remove the bolts.
2 Remove the battery tray.
- To install, tighten to 28 Nm (21 lb-ft).

All vehicles







4. Disconnect the blower motor resistor electrical connector.







5. Remove the blower motor resistor.
1 Remove the 2 screws.
2 Remove the blower motor resistor.

6. To install, reverse the removal procedure.