Exhaust Manifold - LH
Exhaust Manifold LHMaterial:
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the engine cover.
3. Remove the nuts.
4. Remove the exhaust manifold nuts and the exhaust manifold.
^ Discard the exhaust manifold gaskets.
5. Clean and inspect the exhaust manifold.
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These may cause scratches and gouges resulting in leak paths. Use a plastic scraper to clean the sealing surfaces.
Clean the sealing surfaces with metal surface prep. Follow the directions on the packaging.
2. Position the new gaskets, the exhaust manifold and tighten the nuts in the sequence shown.
^ Tighten to 25 Nm (18 ft. lbs.).
3. Position the exhaust Y-pipe flange and install the 4 nuts.
^ Tighten to 40 Nm (30 ft. lbs.).