Front Seat Backrest - 20 Percent

FRONT SEAT BACKREST - 20 PERCENT

Removal and Installation
1. Remove the front seat.







2. NOTE: The top of the LH trim panel is press fit onto the top of the bracket.

Remove the LH trim panel.
1 Release the safety belt guide by pulling out the pin-type retainers.
2 Remove the 2 screws.







3. Pry the RH trim cover from the attachment tabs.







4. NOTE: The right side seat trim panels are mounted to the seat adjuster with pin-type retainers.

Remove the right side seat trim.
1 Remove the upper seat trim.
2 Remove the lower seat trim.







5. Remove the seat backrest mounting bolts from the right side of the seat backrest latch bracket.
- To install, tighten to 50 Nm (37 lb-ft).







6. Remove the seat backrest mounting bolt from the left side of the seat backrest mounting bracket.
- To install, tighten to 50 Nm (37 lb-ft).

7. Remove the seat backrest.
8. To install, reverse the removal procedure.
- Make sure the safety belt is not twisted prior to installation.
- Make sure the safety belts and buckles are accessible to the occupants after installation.