Timing Drive Components - Hydraulic Chain Tensioner, LH

Timing Drive Components - Hydraulic Chain Tensioner, LH

Material:

Timing Drive Components - Hydraulic Chain Tensioner, LH:

Removal and Installation
1. Remove the intake manifold.
2. Remove the thermostat housing.
3. Remove the hydraulic chain tensioner.
^ To install, tighten to 44 Nm (32 ft. lbs.).

4. NOTE: Lubricate the new O-ring seal with clean engine oil.

Remove and discard the O-ring seal.
5. To install, reverse the removal procedure.