Test A: The Roof Opening Panel Has Excessive Wind Noise

PINPOINT TEST A: THE ROOF OPENING PANEL HAS EXCESSIVE WIND NOISE

A1-A2:

A3:

Normal Operation
When the roof opening panel glass is completely closed, it is flush with the roof panel and correctly sealed. When the roof opening panel glass is in the VENT position, the leading edge of the glass panel should contact the primary seal.

Possible Causes
- Damaged or poorly fitting roof opening panel primary seal
- Damaged or poorly fitting roof opening panel fixed glass front seal
- Damaged or poorly fitting roof opening panel front trim panel seal
- Damaged or poorly fitting roof opening panel side trim panel seal
- Damaged or poorly fitting roof opening panel fixed glass side seal
- Damaged or poorly fitting deflector assembly