Differential Seals - LH

Differential Seals - LH

Special Tool(s):

Material:

Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
2. Remove the transaxle drain plug and drain the fluid.





3. Remove the LH halfshaft.
4. Using the special tools, remove and discard the LH differential seal.





Installation
1. Using the special tool, install the LH differential seal.





2. Install the LH halfshaft.
3. Using a small amount of thread sealant on the threads, install the transaxle drain plug.
^ Tighten to 25 Nm (18 lb-ft).





4. Fill the transaxle with clean automatic transmission fluid.
5. Start the engine and run through all the gears and check fluid level.