Wiper Motor - Rear Window

WIPER MOTOR - REAR WINDOW

Exploded View







Removal and Installation
1. Remove the rear pivot arm.
2. Remove the rear wiper motor shaft nut cover.
3. Remove the rear wiper motor shaft nut.
- To install, manually finger-tighten the nut, then tighten to 6 Nm (53 lb-in).

4. Open the liftgate window.
5. Remove the rear wiper motor cover trim panel.







6. Remove the rear wiper motor.
1 Disconnect the electrical connector.
2 Remove the 2 rear window wiper motor nuts.
- To install, tighten to 7 Nm (62 lb-in).

3 Remove the rear window wiper motor.







7. To install, reverse the removal procedure.