Test B: No Power in RUN/ACC

Pinpoint Test B: No Power in RUN/ACC
Refer to Vehicle/Diagrams, Power Distribution for schematic and connector information.

Normal Operation
The ignition switch is placed in the ACC position, fused battery voltage is supplied to the central junction box (CJB) along circuit 297 (BK/LG).
When the ignition switch is placed in the RUN position, fused battery voltage is supplied to the CJB along circuits 297 (BK/LG) and 964 (DB/LG).

This pinpoint test is intended to diagnose the following:
^ Wiring, terminals or connectors
^ Ignition switch
^ CJB

B1-B2:

B2-B4: