Seat Track - 60 Percent
SEAT TRACK - 60 PERCENTExploded View
Seat Backrest, Front, 40 Percent:
Seat Backrest, Front, 60 Percent:
Seat Cushion, Front, 60 Percent (Part 1):
Seat Cushion, Front, 60 Percent (Part 2):
Seat Cushion, Driver, 40 Percent (Part 1):
Seat Cushion, Driver, 40 Percent (Part 2):
Seat Cushion, Front Passenger (Part 1):
Seat Cushion, Front Passenger (Part 2):
Seat Armrest, Front, 60 Percent:
Removal
WARNING: Never probe the electrical connectors on safety belt buckle/retractor pretensioners or adaptive load limiting retractors. Failure to follow this instruction may result in the accidental deployment of the safety belt pretensioners or adaptive load limiting retractors, which increases the risk of serious personal injury or death.
NOTE:
- The air bag warning indicator illuminates when the restraints control module (RCM) fuse is removed and the ignition switch is ON. This is normal operation and does not indicate a supplemental restraint system (SRS) fault.
- The SRS must be fully operational and free of faults before releasing the vehicle to the customer.
1. Remove the seat.
2. Remove the 60 percent seat armrest.
3. Remove the 60 percent seat backrest assembly.
4. Remove the seat track assist spring.
5. Remove the seat track adjustment handle.
- Remove one side of the seat track adjustment handle at a time.
6. Remove the 4 seat track-to-cushion frame bolts and remove the seat track from the seat cushion frame.
7. Remove the 8 rail-to-seat track nuts and separate the seat track rails from the seat track.
Installation
1. Install the seat track rails to the seat track and install the 8 nuts.
- Tighten to 25 Nm (18 lb-ft).
2. Install the seat track and 4 seat track-to-cushion frame bolts.
- Tighten to 6 Nm (53 lb-in).
3. Install the seat track adjustment handle.
- Install one side of the seat track adjustment handle at a time.
4. Install the seat track assist spring.
5. Install the 60 percent seat backrest assembly.
6. Install the 60 percent seat armrest.
7. Install the seat.