2-Door, SuperCab

SEAT - REAR, 2-DOOR, SUPERCAB

Exploded View

2-Door SuperCab:

Removal and Installation
1. Remove the lower rear seat trim panel.
- Remove the pin-type retainers.
- Remove the lower rear seat trim panel.

2. Remove the 5 rear seat-to-floor bolts.
- To install, tighten to 23 Nm (17 lb-ft).

3. Remove the safety belt bolt and remove the rear seat.
- To install, tighten to 40 Nm (30 lb-ft).

4. To install, reverse the removal procedure.
- Make sure the safety belts and buckles are accessible to the occupants after installation.