Pinpoint Test AU: The Phone/Bluetooth Interface Is Inoperative

Ford Work Solutions(TM)

Pinpoint Test AU: The Phone/Bluetooth Interface Is Inoperative

Normal Operation

The in-dash computer contains a Bluetooth antenna that provides for various Bluetooth-enabled devices to interact with the Ford Work Solutions(TM) system.

When a new Bluetooth device is added, it must first be paired to the in-dash computer. Most Bluetooth devices can pair with the in-dash computer, although functionality may vary. When pairing a device, the in-dash computer generates a Personal Identification Number (PIN) that must be entered on the Bluetooth device in order for the pairing process to be successful. There are also some device-specific actions that must take place. For additional information on the pairing process, refer to the Owner's Literature.

For the in-dash computer to detect the Bluetooth device, the device must be within 3 m (10 ft) of the in-dash computer.

This pinpoint test is intended to diagnose the following:

- Customer error
- Customer Bluetooth device
- In-dash computer



PINPOINT TEST AU: THE PHONE/BLUETOOTH INTERFACE IS INOPERATIVE

AU1-AU2: