Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2009 >> Fusion FWD L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Manual Transmission/Transaxle >> Seals and Gaskets >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Seals and Gaskets: Service and Repair




Halfshaft Seal













Removal and Installation

NOTICE: New halfshaft oil seals should be installed anytime the halfshafts are removed. Failure to install new halfshafts seals may result in transaxle oil leak(s) and damage to the transmission may occur.

1. Remove the transaxle drain plug and drain the fluid.

2. Remove the RH intermediate shaft or LH halfshaft.

3. Using the Slide Hammer with the Stator Case Bearing Remover, remove the RH intermediate shaft oil seal or the LH halfshaft oil seal.





Installation

1. Using the Output Shaft Seal Installer, install the halfshaft oil seal.





2. NOTE: Do not allow the splines on the halfshaft to touch the oil seal.

Install the RH intermediate shaft or LH halfshaft.

3. Fill the transaxle to specification. For additional information, refer to Transaxle Draining and Filling Procedures.

pro multis · About Operation CHARM