Radiator Cooling Fan Motor: Service and Repair

Cooling Fan Motor and Shroud









Removal and Installation

1. Remove the Air Cleaner (ACL) assembly. For additional information, refer to Fuel Delivery and Air Induction.

2. If equipped, detach the 2 block heater wiring clips from the radiator support.





3. Detach the wiring harness retainers and position the harness aside.

4. Position aside the upper radiator hose from the cooling fan motor and shroud.

5. Disconnect the cooling fan motor electrical connector.

6. Remove the 2 bolts and the cooling fan motor and shroud.
- To install, tighten to 6 Nm (53 lb-in).

7. To install, reverse the removal procedure.