Pickup Bed Storage Compartment Seal - Side Compartment

Pickup Bed Storage Compartment Seal - Side Compartment

1. Remove the side compartment lid. For additional information, refer to Pickup Bed Storage Compartment Lid - Side Compartment Pickup Bed Storage Compartment Lid - Side Compartment.

2. NOTE: The storage compartment seal is installed over the hinge assembly.

Remove the storage compartment seal from the storage compartment.

- Remove any adhesive or residual seal material.

- Clean the lid surface with a 50/50 solution of alcohol and water.

- Apply adhesive promotor.

- Apply seal.

- Apply pressure to the seal with a roller and allow seal to cure before installation for one hour.

3. To install, reverse the removal procedure.