Selector Lever Bezel

Selector Lever Bezel









Removal

1. Using a suitable tool, remove the instrument panel to floor console finish panel.





2. Remove the console upper trim panel, console tray and cup holder inserts.





3. Remove and discard the RH selector lever knob cover.

1. Start at the bottom front.

2. Move towards the top front and remove the cover.





4. Remove and discard the LH selector lever knob cover.

1. Start at the bottom front.

2. Move towards the top front and remove the cover.





5. Remove and discard the RH selector lever knob screw.





6. NOTE: Verify the LH and RH knob body towers are present and not damaged.

Remove and discard the LH selector lever knob screw and remove the selector lever knob.





7. Disconnect the Tow/Haul switch electrical connector and remove the selector lever knob.





8. Lift the tabs on the selector lever bezel and lift the bezel.





9. Disconnect the electrical harness from the bezel and remove the selector lever bezel.





Installation

1. Connect the electrical harness onto the selector lever bezel.





2. Align the brake shift interlock override tab into its guide.





3. Install the selector lever bezel onto the selector lever housing.





4. Connect the Tow/Haul switch electrical connector and install the selector lever knob.





5. Install a new LH selector lever knob screw.





6. Install a new RH selector lever knob screw.





7. Install a new LH selector lever knob cover.





8. Install a new RH selector lever knob cover.





9. Install the console upper trim panel, console tray and cup holder inserts.





10. Install the instrument panel to floor console finish panel.