Output Shaft Speed (OSS) Sensor

Output Shaft Speed (OSS) Sensor













Removal

All vehicles

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.

2. Disconnect the Output Shaft Speed (OSS) sensor connector.





Transmissions with a fixed flange

3. NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the transmission.

Remove the OSS sensor.

1. Remove the bolt.

2. Remove the OSS sensor.





Transmissions without a fixed flange

4. NOTE: Prior to removing the sensor, make sure that the area around the sensor is free of foreign material to prevent contamination entering the transmission.

Remove the OSS sensor.

1. Remove the bolt.

2. Remove the OSS sensor.





Installation

Transmissions with a fixed flange

1. Install the OSS sensor.

1. Lubricate the O-ring with transmission fluid and install the OSS sensor.

2. Install the bolt.
- Tighten to 9 Nm (80 lb-in).





Transmissions without a fixed flange

2. Install the OSS sensor.

1. Lubricate the O-ring with transmission fluid and install the OSS sensor.

2. Install the bolt.
- Tighten to 9 Nm (80 lb-in).





All vehicles

3. Connect the OSS sensor connector.