Selector Lever - Floor Shift

Selector Lever - Floor Shift

Expedition









Navigator









Removal

Expedition

1. Remove the selector lever trim ring, console tray and cup holder insert.





2. Remove the screw and the console upper trim.





3. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Disconnect the selector lever cable from the selector lever.

1. Disconnect the selector lever cable from the selector lever arm.

2. Disconnect the selector lever cable from the selector lever housing.





4. Disconnect the selector lever electrical connector.





5. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Remove the bolts and lift the selector lever out of the console.





Navigator

6. Remove the selector lever trim ring.





7. NOTE: Using a suitable tool, lift and remove the floor console upper panel from the rear.

Remove the floor console upper panel.





8. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Disconnect the selector lever cable from the selector lever arm ball stud.





9. Remove the center console LH finish panel.





10. Disconnect the selector lever cable from the selector lever housing.





11. Disconnect the selector lever electrical connector.





12. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Remove the bolts and lift the selector lever out of the console.





Installation

Expedition

1. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Install the selector lever into the console.

- Tighten to 8 Nm (71 lb-in).





2. Connect the selector lever electrical connector.





3. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever cable into the bracket and listen for the selector lever cable to click into place. Pull back on the selector lever cable to make sure that it is locked into the bracket.

NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Connect the selector lever cable onto the selector lever.

1. Connect the selector lever cable onto the selector lever housing.
- Listen for the audible click.

- Pull back on the selector lever cable to make sure that it is securely installed.

2. Connect the selector lever cable onto the selector lever arm.
- Listen for the audible click.

- Pull back on the selector lever cable to make sure that it is securely installed.





4. Install the console upper trim and the screw.





5. Install the selector lever trim ring, console tray and cup holder insert.





Navigator

6. NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Install the selector lever into the console.

- Tighten to 8 Nm (71 lb-in).





7. Connect the selector lever electrical connector.





8. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever cable into the bracket and listen for the selector lever cable to click into place. Pull back on the selector lever cable to make sure that it is locked into the bracket.

Connect the selector lever cable onto the selector lever housing.





9. Install the center console LH finish panel.





10. NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place. Press the selector lever cable into the bracket and listen for the selector lever cable to click into place. Pull back on the selector lever cable to make sure that it is locked into the bracket.

NOTE: The selector lever bezel has been removed from art for clarity. Do not remove the selector lever bezel.

Connect the selector lever cable onto the selector lever arm.

- Listen for the audible click.

- Pull back on the selector lever cable to make sure that it is securely installed.





11. Install the floor console upper panel.





12. Install the selector lever trim ring.





All vehicles

13. Adjust the selector lever cable. For additional information, refer to Selector Lever Cable Adjustment Adjustments.