Seat Backrest - Rear, Crew Cab

Seat Backrest - Rear, Crew Cab

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Rear, Crew Cab Seat - Exploded View, Rear, Crew Cab.

1. Remove the seat. For additional information, refer to Seat - Rear, Crew Cab, 40 Percent Seat - Rear, Crew Cab, 40 Percent or Seat - Rear, Crew Cab, 60 Percent Seat - Rear, Crew Cab, 60 Percent.

2. Remove the 2 screws and inboard side shield.

3. Remove the screw and outboard side shield.
- If detached, return the retainer clip to the side shield before installation.

4. If equipped, disconnect the cushion heater mat electrical connector.

5. Remove the 2 backrest pivot bolts and backrest.
- To install, tighten to 25 Nm (18 lb-ft).

6. To install, reverse the installation procedure.