Seat Cushion Thermo-Electric Device

Seat Cushion Thermo-Electric Device

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Front Seat - Exploded View, Front.

1. Remove the seat cushion cover. For additional information, refer to Seat Cushion Cover - Front Seat Cushion Cover - Front.

2. Remove the screw from the Thermo-Electric Device (TED) mounting bracket.

3. Remove the cushion TED.
- Disconnect the electrical connector.

- Detach the pin-type retainer and wiring harness.

- Route the wiring harness and remove the TED.

4. To remove the TED mounting bracket, un-hook from the cushion support wires.

5. To install, reverse the removal procedure.