Wheel Speed Sensor Ring - Rear, Four-Channel

Wheel Speed Sensor Ring - Rear, Four-Channel













Removal

1. Remove the rear wheel hub. For additional information, refer to Wheel Hubs and Bearings - Full Floating Axle - Ford Wheel Hubs and Bearings - Full Floating Axle - Ford.

2. Using the Step Plate and the 2 or 3 Jaw Puller, remove the wheel speed sensor ring.





3. Clean any dirt or foreign material from the wheel speed sensor ring contact area on the wheel hub.

Installation

1. Position the wheel speed sensor ring on the rear wheel hub.

2. Place a block of wood on top of the wheel speed sensor ring and install the ring by gently and evenly tapping the wood block with a hammer.





3. Install the rear wheel hub. For additional information, refer to Wheel Hubs and Bearings - Full Floating Axle - Ford Wheel Hubs and Bearings - Full Floating Axle - Ford.