Camshaft Roller Follower

Camshaft Roller Follower









Removal and Installation

1. Remove the LH and RH valve covers. For additional information, refer to Valve Cover - RH Valve Cover - RH and Valve Cover - LH Valve Cover - LH.

2. Remove the fuel rail. For additional information, refer to Fuel Charging and Controls - 4.0L SOHC Fuel Rail.

3. Remove the cooling fan. For additional information, refer to Engine Cooling Service and Repair.

4. Rotate the crankshaft until the camshaft for the cylinder being serviced is at base circle.





5. NOTE: Mark each camshaft roller follower to make sure it is returned to its original position.

Using the Valve Spring Compressor, remove the camshaft roller followers.





6. NOTE: The camshaft roller followers must be installed in their original positions.

NOTE: Lubricate the camshaft roller followers with clean engine oil.

To install, reverse the removal procedure.