Instrument Panel Upper Section - RH

Instrument Panel Upper Section - RH

1. Remove the passenger air bag module.

2. Remove the 4 instrument top panel-to-instrument panel screws from the back side of the instrument panel.

3. Remove the RH instrument trim panel. For additional information, refer to Instrument Panel- Exploded View Instrument Panel - Exploded View.

4. Remove the RH vent register.

5. Remove the Front Controls Interface Module (FCIM) and instrument panel speaker.

6. Remove the screw from the lower left corner of the RH instrument panel top cover.
- To install, tighten to 3 Nm (27 lb-in).






7. Remove the screw from the lower right side of the RH instrument panel top cover.
- To install, tighten to 3 Nm (27 lb-in).






8. Remove the RH instrument panel top cover by pulling straight back to disengage the clips.

9. To install, reverse the removal procedure.