Trim Panel Replacement - Endgate (Envoy XUV)

Trim Panel Replacement - Endgate (Envoy XUV)

Removal Procedure




1. Remove the 6 screws that retain the panel to the endgate.
2. Remove the endgate panel from the vehicle

Installation Procedure




1. Position the endgate panel onto the endgate.

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the 6 endgate panel screws retaining the panel to the endgate.

Tighten the endgate panel screws to 4 N.m (35 lb in).