47. Camshaft Removal

Camshaft Removal

Tools Required
^ J7872 Dial indicator set.





1. Measure the camshaft end play using J7872.
^ The production value is 0.050 - 0.114 mm (0.002 - 0.0045 inch) and service limit is 0.20 mm (0.008 inch).
^ Replace the camshaft or the camshaft thrust plate if the measured value exceeds the service limit.





2. Block the crankshaft from turning with a wooden handle.
3. Loosen the camshaft gear bolt and leave the bolt finger tight.





4. Remove the camshaft exciter ring bolts.
5. Remove the camshaft exciter ring.
6. Remove the camshaft thrust plate bolts through the holes in the camshaft gear.





7. Remove the camshaft with the camshaft gear attached.





8. Remove the camshaft gear bolt and washer.
9. Remove the camshaft gear.
10. Remove the camshaft thrust plate.