Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2011 >> Sierra 3500 Denali 2WD V8-6.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 84. Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

84. Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)




Camshaft Position Actuator Solenoid Valve Inspection (Off-Vehicle)





Important: Do not use the camshaft position (CMP) actuator solenoid valve again. Install a NEW valve during assembly. The inspection procedure below is provided for off-vehicle diagnostic purposes only.


1. Inspect the CMP valve for the following conditions:

* Dirt, debris, or restrictions within the oil passages (1)
* Damaged threads (2)
If the threads of the valve are damaged, also inspect the threads in the front of the camshaft for damage.
* Dirt, debris, or restrictions within the oil inlet check valve (3)
If debris is detected, the engine assembly should be inspected to determine the source of contamination.




2. Inspect for a sticking valve spool or broken valve spool spring.
3. Depress the valve spool into the housing. The valve should move freely with no binding or sticking and minimal resistance inward. When released, the valve spring should return the spool to the proper extended position (1) of 6.08-6.12 mm (0.239-0.241 in).

pro multis · About Operation CHARM