Operation CHARM: Car repair manuals for everyone.
Home >> GMC >> 2011 >> Sierra 3500 Denali 2WD V8-6.0L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> 98. Valve Lifter Installation (With Active Fuel Management)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

98. Valve Lifter Installation (With Active Fuel Management)




Valve Lifter Installation (With Active Fuel Management)





Note:
* When using the valve lifters again, install the lifters to their original locations.
* If camshaft replacement is required, the valve lifters must also be replaced.
* Each of the 4 valve guide assemblies will contain 2 active fuel management valve lifters and 2 non-active fuel management valve lifters.
* With the lifters and guides properly installed, cylinders 1, 4, 6, and 7 lifter bores will each contain 2 active fuel management valve lifters.

1. Lubricate the valve lifters (209, 219) and engine block valve lifter bores with clean engine oil.




2. Insert the valve lifters into the lifter guides.

* Align the flat area (3) on the top of the non-active fuel management lifter with the flat area in the lifter guide bore. Push the lifter completely into the guide bore.
* The active fuel management lifters (4) are to be installed into the guide, with the notch in the guide (1) aligned with the raised area (2) of the lifter.




3. Install the valve lifters and guide assembly (210) to the engine block.

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the valve lifter guide bolts (211) and tighten to 12 Nm (106 lb in).

pro multis · About Operation CHARM