Locking Differential Cam Unit Disassemble (8.6 Inch Axle)

Locking Differential Cam Unit Disassemble (8.6 Inch Axle)

1. Remove the locking differential clutch disc thrust washer.




2. Using the appropriate tool, remove the external snap ring retainer.




3. Remove and disassemble the locking differential clutch disc set (1).

Note: The locking differential clutch disc thrust washer is NOT serviced separately. It is serviced with the locking differential clutch disc set.

4. Remove the locking differential clutch disc thrust washer (4).

Note: The locking differential clutch disc guide is NOT serviced separately. It is serviced with the locking differential clutch disc set.

5. Remove the locking differential clutch disc guide (5).
6. Remove the locking differential cam (3).