P0745

DTC P0745: Problem in Hydraulic Control System of A/T Clutch Pressure Control Solenoid Valve A Circuit

NOTE: Record all freeze data and review General Troubleshooting Information before you troubleshoot.

1. Check whether the OBD II scan tool indicates another code.
Does the OBD II scan tool indicate another code?
YES - Perform the troubleshooting for the indicated code(s). Turn the ignition switch OFF, and go to step 4 after troubleshooting.
NO - Go to step 2.
2. Turn the ignition switch OFF.
3. Replace the A/T clutch pressure control solenoid valve A.
4. Reset the PCM memory by removing the No. 6 ECU fuse (15A) in the under-hood fuse/relay box for more then 10 seconds.
5. Start the engine, and shift to the 1 position. Start the vehicle off in the 1 position, drive at 19 mph (30 km/h) for 10 seconds, shift to the 2 position, drive at 19 mph (30 km/h) for 10 seconds, then decelerate to a stop.
6. Repeat step 5.
7. Recheck for DTC P0745.
Does the OBD II scan tool indicate code P0745?
YES - Replace the transmission assembly.
NO - The problem has been corrected.