An "In Line Diag" Diagnostic Screen Appears Every Time the Vehicle Is Started

An "In Line Diag" diagnostic screen appears every time the vehicle is started




1. When a navigation control unit is powered up for the first time at the factory, the "factory diagnosis" screen (In Line Diag) shows up. Normally the i factory performs the steps necessary to verify proper operation and terminate the "factory diagnostic". Until the proper confirmation sequence is performed/the screen will show up every time the vehicle is started.
2. Follow the steps to prevent the screen from showing up in the future:
- Hold down the buttons (Menu+Map/Guide+ Cancel) for about 5 seconds (the "Select Diagnosis Items" screen will appear).
- Hold down the Map/Guide button for 5-10 seconds (A screen with a "Complete" button, will appear).
- Touch "Complete", and then the "Return" button (the system may re-boot).
- Restart the vehicle, and confirm normal operation by completing the "PDI of the navigation system" Service Bulletin.