Sunroof / Moonroof Switch: Testing and Inspection

Switch Test/Replacement

NOTE: The moonroof can still be operated for about 10 minutes after the ignition switch is turned from the "II" to the "I" or "0" positions, as long as none of the doors are opened. This provides a convenience to parked occupants while offering a degree of security against unwanted or accidental moonroof operation.

1. Remove the driver's panel.




2. Carefully push out the moonroof switch (A) from behind the driver's panel, then disconnect the 6P connector (B) from the switch.




3. Check for continuity between the terminals in each switch position according to the table.
4. If the continuity is not as specified, replace the illumination bulbs (C) or the switch.