Rear Seat-Back Cover

Rear Seat-back Cover Replacement

NOTE:
- Take care not to tear the seams or damage the seat covers.
- Put on gloves to protect your hands.

1. Remove the seat-back.
2. Remove the armrest.




3. Release the hook strips (A) and fasteners (B).




4. Pull back the edge of the seat-back cover (A), then release the hook strips (B, C).




5. Pull out the headrest guides (A) while pinching the tabs on the end of the guides, and remove them.




6. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B), then remove the seat-back cover.
7. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook strips and clips.
- Replace any clips you removed with new ones. Install them with commercially available upholstery ring pliers.