Harmonic Balancer - Crankshaft Pulley

Crankshaft Pulley
Tighten the bolt 37 Nm (3.8 kgf-m, 27 ft. lbs.)
Use a torque wrench and a heavy duty 19 mm socket (C).

If the pulley bolt or crankshaft are new, tighten the bolt 177 Nm (18.0 kgf-m, 130 ft. lbs.)

Then remove the bolt and tighten it 37 Nm (3.8 kgf-m, 27 ft. lbs.)





2 Mark the bolt head (D) and the crankshaft pulley (E) as shown, then tighten the bolt an additional 90°