Rear Seat Recline Adjuster
Rear Seat Recline Adjuster Removal/Installation1. Remove the rear seat.
2. Remove these items from the rear seat:
- Rear seat-back cover
- Rear seat support
- Rear seat hinge lock
- (Latch Child Seat Anchor) cover
3. From under the seat cushion, release the hooks, and pull back the seat cushion cover.
4. Release the hooks from the seat cushion frame.
5. Remove the hook from the hook strap, and pull the hook strap out through the slit in the seat cushion cover.
6. Remove the screw, and pull the strap out.
7. Release the hooks securing the seat cushion cover from the recline cover.
8. Pull back the seat cushion cover. Remove the screw, and pull the recline cover down to release the hook.
9. Remove the nut, then remove the recline strap from the recline adjuster lever.
10. Remove the bolts, then remove the recline adjuster (A).
11. Install the recline adjuster in the reverse order of removal, and note these items:
- Apply multipurpose grease to the moving portions of the recline adjuster.
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks.