A-Pillar Corner Trim

A-Pillar Corner Trim Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Take care not to scratch the trim and body.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Open the front door.




2. Using a trim tool, detach the bottom clip of the A-pillar corner trim (A).




3. Gently slide the A-pillar corner trim (A) up along the A-pillar to release it from the clips.




4. Using a trim tool, remove the clips (A) from the body.
5. Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.




6. Install the clips (A) (three places) on the A-pillar corner trim (B).




7. Hold the A-pillar trim (A) up, and fit the clips (B) into the holes in the body, then push on the trim until the clips snap into place securely.