DTC B1-8x

DTC B1-17, B1-8x, B1-9x, B1-Ax, B1-Bx ("x" can be 0 thru 9 or A thru F) Internal Failure of the Roll Rate Sensor

1. Erase the DTC memory.
2. Turn the ignition switch ON (II), and check that the SRS indicator comes on for about 6 seconds and then goes off.

Does the SRS indicator stay on, and is B1-17, B1-8x, B1-9x, B1-Ax, or B1-Bx indicated?

YES - Replace the roll rate sensor. If the DTC returns, replace the SRS unit.

NO - Intermittent failure, system is OK at this time. Go to Troubleshooting Intermittent Failures. Troubleshooting Intermittent Failures If another DTC is indicated, go to the DTC Troubleshooting Index. DTC List - Supplemental Restraint System