J35A9

DTC P2649: Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Circuit High Voltage (Engine Type: J35A9)




General Description
The VTEC system activates the rocker arm oil control solenoid (VTEC solenoid valve) by command from the powertrain control module (PCM), and it charges/discharges the hydraulic circuit of the VTEC mechanism that switches valve timing between Low and High. If the return signal is ON (High) when the PCM outputs the OFF (Low) signal to the rocker arm oil control solenoid (VTEC solenoid valve), the PCM detects a malfunction and a DTC is stored.




Monitor Execution Sequence, Duration, DTC Type, OBD Status




Enable Conditions

Malfunction Threshold
The return signal is ON (High) for at least 2 seconds when the PCM outputs the OFF (Low) signal to the rocker arm oil control solenoid (VTEC solenoid valve).

Driving Pattern
Start the engine, and let it idle for at least 7 seconds.

Diagnosis Details

Conditions for illuminating the MIL
When a malfunction is detected, the MIL comes on and the DTC and the freeze frame data are stored in the PCM memory.

Conditions for clearing the MIL
The MIL will be cleared if the malfunction does not recur during three consecutive trips in which the diagnostic runs.

The MIL, the DTC, and the freeze frame data can be cleared by using the scan tool Clear command or by disconnecting the battery.