Hood Latch: Service and Repair

Hood Latch Replacement




1. Remove the bolts securing the hood latch (A) on the body.




2. Detach the hood opener cable (A) from the latch, then remove the latch from the body.




3. If equipped, disconnect the hood latch switch connector (A) and detach the harness clip (B).




4. Install the hood latch in the reverse order of removal, and note these items:
- Apply multipurpose grease to each location of the hood latch as indicated by the arrows.
- Make sure the hood opener cable is connected properly and hood latch switch connector is plugged in properly.
- Make sure the cable actuates the latch before you close the hood.
- Adjust the hood latch alignment.
- Make sure the hood locks securely.
- For some models, make sure the security system operates properly with the hood opener and closed.