Rear Engine Mount Replacement
Rear Engine Mount ReplacementJ35Z1 Engine
1. Remove the air cleaner housing assembly.
2. Raise the vehicle on the hoist to full height.
3. Disconnect the active control engine mount (ACM) actuator connector (A) from the rear engine mount, then remove the harness clamp (B). Remove the bolt (C) securing the P/S line.
4. Remove the rear engine mount bolts.
5. Lower the vehicle on the hoist.
6. Support the engine with a jack and wood block under the oil pan.
7. Remove the rear mount stop (A), then remove the front mount bolt (B).
8. Remove the rear mount.
9. Remove the rear mount base.
10. Install the rear mount in the reverse order of removal.