Set Speed Does Not Resume When the Resume/Accel Button Is Pressed (With the Cruise Control Main Button Pressed on, and Set Spee

Set speed does not resume when the resume/accel button is pressed (with the cruise control main button pressed on, and set speed temporarily canceled by pressing the brake pedal)

Diagnostic Procedure:

1. Check for PGM-FI and body DTCs.

2. Check the brake pedal position switch adjustment. Testing and Inspection

3. Do the cruise control input test. Cruise Control Input Test Test the cruise control resume/accel switch signal input. Test the brake pedal position switch signal input.

4. Do the cruise control combination switch test. Cruise Control Combination Switch Test/Replacement

Also check for:

- Faulty brake pedal position switch
- Open circuit, loose or disconnected terminals: LT GRN/BLK