Cylinder Head Cover Removal

Cylinder Head Cover Removal

Front

1. Remove the intake manifold. Intake Manifold Removal and Installation

2. Remove the three ignition coils from the front cylinder head. Service and Repair

3. Disconnect the four connectors (A) and remove the harness clamp (B), the harness holders (C), and the dipstick (D).






4. Remove the front cylinder head cover.






Rear

1. Remove the intake manifold. Intake Manifold Removal and Installation

2. Remove the three ignition coils from the rear cylinder head. Service and Repair

3. Remove the drive belt. Service and Repair

4. Remove the bolt securing the power steering (P/S) hose bracket and the P/S pump without disconnecting the P/S hoses. Cylinder Head Removal

5. Remove the harness holder mounting bolts (A), the ground cable (B), and the breather hose (C).

6. Disconnect the three injector connectors (D) and remove the harness clamps (E).

7. Remove the engine wire harness (F) from the rear upper cover.






8. Remove the rear cylinder head cover.