Second Row Center Seat Recline Cover Removal/Installation

Second Row Center Seat Recline Cover Removal/Installation

Special Tools Required

- KTC Trim Tool Set SOJATP2014
*

NOTE:

- Put on gloves to protect your hands.
- Take care not to tear or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

1. Remove the second row center seat.

2. Remove the second row center seat belt detachable anchor.

3. Remove the recline cover (A).

1. Remove the cap (B), then remove the screw.

2. Pull up the cover, then detach the clips and release the tabs (C).





4. Remove the center cover (A).

1. Remove the cap (B), then remove the screw.

2. Pull up the cover, then detach the clips and release the tabs (C).

3. If necessary, remove the upper recline inner cover (D).





5. Install the recline cover in the reverse order of removal, and push the clips and the tabs into place securely.