ATF Cooler Hose Replacement (5-Speed A/T)

ATF Cooler Hose Replacement

Exploded View





NOTE: When installing the hose clamps, make sure they do not interfere with the surrounding parts.

1. Install the ATF cooler hoses over the ATF cooler lines with the clips at appropriate points in reference to the following list.

NOTE:

- Be sure to install the ATF cooler hose with the white paint mark (J) facing up.
- Connect the ATF cooler hose (K) to the ATF cooler line (L) by aligning the paint marks (M).





2. Refill the transmission with ATF to the proper level ATF Replacement (5-Speed A/T).