Transmission Fluid Pressure Switch E (6th Clutch) Replacement (6-Speed A/T)

Transmission Fluid Pressure Switch E (6th Clutch) Replacement

1. Remove the air intake scoop.

2. Do the battery removal procedure.

3. Remove the air cleaner Service and Repair.

4. Remove the intake air duct.

5. Remove the main under-hood fuse box.

6. Remove the battery base.

7. Disconnect the transmission fluid pressure switch E (6th clutch) connector, and remove transmission fluid pressure switch E (6th clutch) and the sealing washer (A).





8. Install transmission fluid pressure switch E (6th clutch) with a new sealing washer, and tighten the switch.

9. Check the connector for corrosion, dirt, or oil, and clean or repair if necessary, then connect the connector securely.

10. Install the battery base.

11. Install the main under-hood fuse box.

12. Install the intake air duct.

13. Install the air cleaner Service and Repair.

14. Do the battery installation procedure.

15. Install the air intake scoop.