Transmission Housing Selector Control Shaft Bearing Replacement (6-Speed A/T)

Transmission Housing Selector Control Shaft Bearing Replacement

Special Tools Required

- Driver Handle, 15 x 135L 07749-0010000
- Bearing Remover Shaft Set, 15 mm 07936-KC10500
- Slide Hammer 07936-371020A
- Bearing Driver Attachment, 28 x 30 mm 07946-1870100

1. Remove the selector control shaft bearing from the transmission housing using the 15 mm bearing remover shaft and the slide hammer.






2. Install the bearing until it bottoms in the transmission housing using the 15 x 135L driver handle and the 28 x 30 mm bearing driver attachment.