Transmission Housing Mainshaft Bearing Removal

A/T Housing Mainshaft Bearing Removal

Special Tools Required

- Bearing Driver Attachment, 78 x 80 mm 07NAD-PX40100
- Driver Handle, 15 x 135L 07749-0010000
- Snap Ring Pliers 07LGC-0010100

1. Remove the reverse idler gear Transmission Housing Reverse Idler Gear Removal/Installation.

2. To remove the mainshaft bearing, expand the snap ring using the snap ring pliers, then push the bearing out. Do not remove the snap ring unless it's necessary to clean the groove in the transmission housing.