Seat Back Cover Replacement

SEAT BACK COVER REPLACEMENT

1. After disconnecting the scuff band (A),remove the seat back panel (B).






2. Disconnect the protector (A) from the back frame, then open the zipper (B).






3. Remove the headrest and headrest guide (A).






4. After removing the hogring clips (A) on the front of seat back and remove the seat back cover (B).

CAUTION: When removing the hogring clip, remove the hogring clip while pressing the wire so as not to separate the wire so as from the sponge.






5. Installation is the reverse of removal.

NOTE:
- Be sure to perform PODS re-zero with Hi-Scan (pro) after replacing parts (passenger's)
- To prevent wrinkles, make sure the material is stretched evenly over the cover (A) before securing the hogring clips (B).
- Replace the hogring clips with new ones using special tool (C).