Operation CHARM: Car repair manuals for everyone.
Home >> Hyundai >> 2005 >> Tucson L4-2.0L >> Repair and Diagnosis >> Restraints and Safety Systems >> Air Bag Systems >> Air Bag >> Service and Repair >> Passenger Airbag Replacement

Passenger Airbag Replacement

PASSENGER AIRBAG REPLACEMENT

REMOVAL

1. Disconnect the battery negative cable and wait at least three minutes before beginning work.
2. Remove the glove box, then disconnect the connector between the SRS main harness connector (A) and front passenger's airbag connector (B).
3. Remove the crash pad.




4. Remove the mounting nuts (A) from the crash pad then remove the passenger's airbag (B).

INSTALLATION

1. Place the new front passenger's airbag on the dash-board tighten the front passenger's airbag mounting nuts.
2. Install the dashboard.
3. Connect the front passenger's airbag connector to the SRS main harness connector.
Attach the front passenger's airbag connector to the connector holder, then reinstall the glove box.
4. Reconnect the battery negative cable.
5. After installing the airbag, confirm proper system operation: Turn the ignition switch On; the SRS indicator light should blink for about six seconds and then go off.
6. Enter the customer's preset radio stations.
pro multis · About Operation CHARM