With Generic Scan Tool

DESCRIPTION
Generic Scan Tool (OBDII scan tool) complying with SAE J1978 has 8 different functions. ISO9141 is used as the protocol.

The name "GST" or "Generic Scan Tool" is used here.




GST INSPECTION PROCEDURE
1. Turn off ignition switch.
2. Connect "GST" to data link connector which is located under LH dash panel near the hood lock release handle.




3. Turn ON ignition switch.
4. Enter the program according to instruction on the screen or in the operation manual.
(*: Regarding GST screens, refer to sample screens shown.)




5. Perform each diagnostic mode according to each service procedure.

For further information, see the GST Operation Manual of the tool maker.

Function: