Symptom Related Diagnostic Procedures

Work Flow Part 1:

Work Flow Part 2:

WORK FLOW

NOTE:
- When LCU connectors are disconnected for more than 1 minute such as during trouble diagnoses, the "disconnected" data will be memorized by the BCM. (While BCM memorizes the "disconnected" data, IVMS communication diagnosis of CONSULT-II will display "PAST NO RESPONSE".) Therefore, after reconnecting the LCU connectors, erase the memory.
- To erase the memory, perform the procedure below.
Erase the memory with CONSULT-II or turn the ignition switch to "OFF" position and remove 7.5 A fuse (No. [14] located in the fuse block (J/B)].




DOOR UNLOCK SENSOR CHECK (DRIVER SIDE)




DOOR SWITCH CHECK




LIGHTING SWITCH (1ST) CHECK




KEY SWITCH (INSERT) CHECK




IGNITION KEY SWITCH (ACC AND IGN) INPUT SIGNAL CHECK




INTERIOR LAMP AND PERSONAL LAMP SWITCH CHECK




ILLUMINATION LAMP CHECK