Function

FUNCTION
The self-diagnosis system can be used without using CONSULT-II. With this system, both self-diagnostic history and fail-safe history are indicated by the SPORT indicator lamp.

SELF-DIAGNOSTIC PROCEDURE
1. Turn ignition switch to "OFF".
2. Start the engine.
3. Quickly switch the active damper suspension select switch from "SPORT" to "AUTO", and vice versa, at least 5 times within 10 seconds immediately after the engine has started.
2 or 3 seconds following the above switch operation, the indicator lamp will come on. This is not the indication of self-diagnosis.
4. Perform the following procedures to enter the corresponding signals.
- Turn steering wheel 180° in either direction from neutral.
- Depress brake pedal.
- Release brake pedal.
- Move the vehicle at least 5 m (16 ft.) forward.